Redtiger ACC Hardwire Kit
$20.99 – $25.99
- [ COMPATIBILITY NOTICE ] The hardwire kit is compatible with REDTIGER F7N series dash cams featuring a USB-C port. It is NOT compatible with devices from other brands or with REDTIGER products that have a non-USB-C interface
- [ EASY TO INSTALL ] With the installation tool, there’s no need to use a cable from a car cigarette lighter socket, instead it’s a permanently hidden cable, and very easy to install
- [ 24 HOURS MONITOR ] The vehicle hard-wire kit connected to a car battery or fuse box power, can realize continuous power supply for 24 hours. It can keep powered on even when your car is turned off
- [ LOW VOLTAGE PROTECTING ] With low voltage protection, RED TIGER hardwire kit will automatically cut off the power after the 60s when the voltage is lower than 11.8V（+-0.2). Not compatible with trucks with voltage above 24V. More security protection like over-current, short-circuit, reverse connection, and overheat
Redtiger ACC Hardwire Kit
Why We Need the Hardwire Kit
Some dash cameras are capable of recording even when the vehicle is turned off. This is accomplished by the dash camera’s parking security mode attribute which makes it possible for the dashboard cam to continue monitoring its surroundings and document video clips while the automobile is parked.
A constant supply is needed to run the dashboard cam when the vehicle is turned off to enable this function. Hardwire kits assist sustain this function by linking the dashboard camera directly to your car’s fuse box while protecting your car from any prospective battery drain.
USB-C hardwire kit
11.5ft USB-C hardwire kit for dash cam or other device powered by Type C USB port, 5V/2A steady output, voltage input supports from 12V-24V.
Low Voltage Protection
Ensure the safety of your vehicle’s battery with the Redtiger Hardwire Kit. It features a low voltage protection mode that cuts off power when the voltage drops below 11.8V(+-0.2).
Universal Compatibility
The 11.5ft voltage hardwire kit is suitable for various types of vehicles, especially regular passenger cars, sedans, SUVs, and trucks. It is used to convert the 12V/24V power supply in vehicles to a lower voltage for devices that require it.
Easy Installation
With the hardwire kit, you can hide the wiring and eliminate clutter inside your vehicle. Enjoy a clean and professional-looking installation.
Enjoy hassle-free setup and reliable power supply.
G-Sensor Function
You can also set Gsensor for the dash cam, when your vehicle suffers from vibration or collision, it will automatically start recording and lock the key video. Preserve critical evidence for insurance claims or legal purposes.
24H Parking Monitoring
The Redtiger hardwire kit connected to car fuse box power, can uninterruptedly supply power for dash camera for 12/24/48 hours. It can even supply power when the car is turned off. Protect your vehicle and capture any potential incidents that may occur.
Multiple Fuse Models
The Redtiger Dash Cam Hardwire Kit offers four different fuse models to cater to various vehicle types. Choose the right fuse for your car model and enjoy a seamless installation.
The B+ (yellow)
The yellow cable should be connected to the fuse of the constant power supply in the car fuse box.
If you are looking for a constant power supply in the fuse box: Use a voltage tester to check the fuse to ensure it still have electricity even if the car engine is off.
The ACC (red)
Identify the ACC (Accessory) fuse slot in the fuse box. This slot provides power when the ignition is on.
Testing method : The tester bulb will light when the engine if on and won’t light when the engine is off.
The Ground (black)
This black cable is connected to the metal parts of the vehicle. There are screw nails and metal parts near the fuse boxes in many cars. Connect the black cable to the screw or metal part.
| Hardwire Kit | USB-C Hardwire Kit, USB-C Hardwire Kit w/ Voltage Display |
|---|
Reviews
There are no reviews yet.