Vantrue Dash Cam Hardwire Kit for S1, M2
Key Features
24/7 Parking Surveillance
| Compatible 12 – 24V VehiclesThis hardwire kit accepts voltage from any type of vehicle runs on 12 – 24V, and works perfectly for cars, trucks, buses, SUVs, or big rigs for continuous power. | Low Voltage ProtectionSmart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it from draining the battery. |
Installation Instruction
Find the Correct Fuse SlotOpen the fuse box, and find the correct fuse slot for your hardwire kit. If you need to find an ignition-switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stay lit on. | Connect the Red WireOnce you’ve determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit and add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation. | Ground the Hardwiring KitSlip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached to plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterward. |
- Key Features
- Compatible with 12-24Vdc for car or truck installations.
- Perfect for 24/7 Parking Surveillance.
- Low voltage protection protects against battery dying.
- What’s in the box
- Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User Manual
- Mini/LP ACN Add-A-Circuit Fuse Holder
- Mini ACS Add-A-Circuit Fuse Holder
- ATO ACU Add-A-Circuit Fuse Holder
- Micro2 Add-A-Circuit Fuse Holder
Technical Details
- Connector: Mini USB Connector
- Input Voltage: DC 12V-24V
- Output Voltage: 5V
- Output Current: 1.5A
- Working Temperature: -22°F to 167°F (-30°C to 75°C)
- Cable Length: 11.5ft
- Low Voltage Protection: 11.6V for 12V vehicle; 23.2V for 24V vehicle.
Reviews
There are no reviews yet.